Blackhawk 4G-5G LPDA Antenna, 700 to 4000MHz

  • Cable

217.11 217.11 217.11 AUD

217.11

This combination does not exist.

Add to Cart

The Blackhawk LPDA Antenna is one of the most popular external antenna solutions for poor 3G / 4G voice and data service. This one antenna can be used on any mobile network, in any area without worrying about compatibility. It is the ideal roof-mounted antenna for Cel-Fi repeaters.


The LPDA antenna covers all cellular bands between the 700 and 4000 MHz range with a high peak gain which projects maximum energy in the direction of the cell tower, while maintaining a wide enough beam to capture signal reflections off nearby buildings, hills, and signal scattered by trees.

The antenna was redesigned in late 2019 to cover the new 3.5 GHz 5G band, making it now an ideal solution for LTE-A Pro and 5G high-speed connectivity when mounted in 2×2 or 4×4 MIMO configuration.

A Log Periodic Dipole Antenna, or LPDA for short, is a clever antenna design that provides exceptional wideband performance by phasing a series of elements together, much like an ordinary Yagi but with each successive element of a smaller (or larger) length. The result of this clever engineering is an antenna that holds high gain, with good tuning, across the entire cellular frequency range.

Features

  • 11 dBi gain across lower bands 698 to 960 MHz
  • 12 dBi gain across bands 1710 to 2700 MHz
  • 12 dBi gain across upper bands 3300 to 4000 MHz
  • Ruggedised construction for Australian conditions
  • Fully welded, powder coat aluminium design
  • Stainless steel mounting clamp included
  • 30 cm tail with pre-terminated N Female connector
  • Ideal for Telstra Next-G and 4GX networks, Optus, and Vodafone 3G/4G & 5G

ELECTRICAL SPECIFICATION

Frequency Range (MHz) 698-960 / 1710-2700 / 3300-4000 MHz
Input Impedance 50 Ω
Peak Gain 11 / 12 / 12 dBi
VSWR ≤ 2.5:1 / ≤ 1.8:1 / ≤ 2.8:1
Polarisation Vertical, linear
Horizontal Beam-width 55 / 42 / 46°
Vertical Beam-width 46 / 34 / 32°
Maximum Input Power 50 W

MECHANICAL SPECIFICATION

Input Connector N Female
Cable 300 mm RG-142 tail
Lightning Protection DC Ground
Radiator Material Fully welded aluminium, black powder coat
Mounting Stainless Steel, pole mount Ø30-50 mm
Dimensions 1240 x 200 x 60 mm
Packing Dimensions 1290 x 210 x 90 mm
Weight 2.2 kg
Rated Wind Velocity 192 km/h
Operating Temperature -40 to +65°C
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.

Recently viewed Products